Pelican MD3200M User Manual

eDVR Installation GuideMD3200M(v 1.0)

10MD3200M rear(9) AC power connector(10) BNC connector for video input(11) Terminal block for sensor, relay, and serial input/output(12) RS232 connect

11INSTALLATION AND CONNECTION4. Connecting & Running4.1. Connecting camera(1) Connect CCTV camera to MD3200M with BNC cable as below.<Note>1

12<Note>Monitor out put of MD3200M is separated as A(Normal) and B(Spot). Connect to Monitor A if only oneMonitor is used .Monitor output is fix

134.4. Supplying power(1) Connect power cable as shown below<Note>1. When supplying power, MD3200M starts bootingautomatically.2. In order to cu

145. Running OSD menu5.1. Using menuPress the [MENU] in keypad of front to open the OSD Configuration Menu(1) Main Menu : The selected tab is shown in

155.2. Dialogue box to edit a wordThere are two methods to input a word..(1) Entering wordsMove pressing [▶] arrow button to enter next word until the

166. Setting remote controllerWhen controlling several eDVRs with one remote controller, set Remote Contorl ID as follows.6.1. Setting ID of MD3200M(1

176.2. Selecting MD3200MIf several eDVRs are set with unique ID numbers, they can be controlled with one remote controller. Toselect a specific eDVR (

187. MD3200M configuration7.1. Basic configuration7.2. Advanced configuration

197.3. External storage & Back up configuration7.4. Internet/ Intranet configuration

CautionSince this device is operation purpose and registered as suitable electromagnetic waves, seller or usershould be cautios on this point. If the

208. eDVR MD3200M basic setting8.1. Viewing ImageWhen power is on, MD3200M starts automatically and images are displayed in basic 16ch-split screenaft

218.2. Setting Date & Time(1) Press [MENU] button and select “Quick Setup” tab.(2) Select “Date/Time” using the [▷] or [▼ ] and press [EXIT] butto

228.2.4. Time Format(1) Select “Time Format” using the [◀/▶] or [▲ /▼ ] button and press [▷] button..(2) Two time formats are available; ‘DD/MM/YYYY,’

238.3. Setting recording conditionRecording conditions under the “Quick Setup” menu tab apply the same values to all analog channels1~16. All settings

248.3.2. Recording Speed/Quality(1) Select “Recording Speed/ Quality using [▲ /▼ ] buttons and press [▷].(2) Select a value using the[◀/▶] button. Pre

259. Connecting and configuring DIO ports<Note> Wire HandlingTrimming WireWhen connecting a wire to a terminal block, follow the instructions be

269.1.2. Connecting sensor inputConnect S1 ~ S16 with referring to the followings. It shows to connect a dry contact (Please refer to“<Note> Wir

279.1.3. Configuring sensor at OSD menu(1) Press the[Menu] button and select “Alarm Source”.(2) Press [▷] or [▼ ] button to move to Sub-Menu, select “

28<Note>1. Configuration a sensor is to set On/Off usage and type.2. Please refer to “Alarm Rec” for saving and “Alarm Act” for relay-out on the

299.2.2. Connecting relay outConnect R1 ~ R4 with referring to the followings, It shows to connect a warming light. Please refer to“<Note> Wire

Important Notice1. Do not place heavy objects on the top of the eDVR2. eDVR is for indoor use. It is not weatherproof. Use eDVR with referring to its

309.2.3. Configuring relay out as OSD menu.Relay can run by sensor or MD and its condition can be set differently according to schedule. When usingthe

319.3. Connecting serial port9.3.1. Configuring serial ports for Pan/Tilt/ZoomThe MD3200 series have most major PTZ protocols already pre-programmed.

329.3.2. Diagram of serial ports9.3.2.1. Diagram of COM1(RS232)9.3.2.2. Diagram of COM2/COM49.3.2.3. Diagram of COM3

339.3.3. Configuring SerialConfigure PTZ COM ports and available models at “System/ Serial Setup” in MD3200 Series.After completing serial setup, conf

349.4. Connecting external device with serial port9.4.1. Connecting text inout device (ATM / POS / Access Control)The MD3200 Series can record text da

359.4.2. Configuring serial setup (COM1) at OSD menu(1) Set the “System” in OSD menu and move to “Serial Setup” menu.(2) Select COM in “Serial Setup”,

369.4.3. Configuring text(1) Select the “Alarm Source” menu among OSD menus.(2) Select the “Text” and set each value.<Note>Before installing any

379.5. Connecting USB deviceUSB port can be used to copy up to 1 minute of images to a USB Flash memory disk. When connectingUSB Device, do not exceed

3810. Connecting External Storage<Note>Extension through NVS04, IEEE 1394b will be supported later.For the details, please contact to local dist

3910.3. Available HDDIt is recommended to use following HDD models with the MD3200M. If a non-recommended HDD isused, WEBGATE Inc. will guarantee the

4ContentsOVERVIEW ... 7

40(9) Shut down “Disk Manager” by pressing [EXIT] button.11. Network monitoring & managingMD3200M can be accessed, controlled, and managed from re

4111.2. Configuring Network infomraiton of MD3200MThe following description is based on Ethernet connection. For more detailed information on the Netw

4212. Using Control Center LiteControl Center List is a DVR Management Software and it makes DVR installtion & setting more easierthroguth a PC wh

433> Select components which wish to install and press “Next” button.“WESP SDK” must be installed.4>.Click the “Install” button after selecting

4412.4. Configuration ToolClick the icon on the desk top to run “Control Center Lite Configuration Tool”.12.5. Monitor* Max. 5 users could be connecte

4512.6. Playback* Max. 2 user could be connected for playback in one unit of MD3200M.Click the icon on the desk top to run “Control Center Lite Playba

46APPENDIXAPPENDIXAPPENDIX

47#1. HDD#1.1. Fundamental notions & termseDVR storing constructure (VFS2)eDVR series has a peculiar storing constructure, and its features are as

48

49(2) HDD Type at Disk Manager[R] Available recording status[V] Connected and formatted as eDVR’s file system. If using ‘Add Used’command, it willbe c

58.2.7. Apply Date/Time ... 228.3. Setting recording co

50#1.2. Installing HDDCompatible HDDIt is recommended to use the following HDD models with the MD3200M. If a non-recommended HDD isused, WEBGATE Inc.

51<Note>When assemble HDD, the base of HDD should be HDD below.(5) After insertion of BRAKET that HDD installed to RACK, take the handle down to

52(1) When power is supplied to MD3200M, “Disk Manager” runs automatically after rebooting. If not,run it manually in “MenuUtilityDisk Manager”.(2)

53When using Disk FarmThe following description is when MD3200M has internal primary disk and 3 sets of IEEE1394 HDD.(1) When external HDD farm is con

54When using RAIDThe following description is when MD3200M has internal primary disk and 1 set of IEEE1394 RAID.<Note RAID>Even though several H

55Replacing HDDChecking HDDMD3200M file system (VFS2) sensors bad sector automatically, and the sensored bad sector is not used.The following means wh

56(5) Set backup range and press the “Start” button after selecting backup HDD.<Note>1. Backup HDD should be formatted as FAT32 type.2. Backup d

57Caution in using HDDFor handling or guaranteeing HDD, WEBGATE follows HDD guaranty condition. WEBGATE doesn’tbear the responsibility about data loss

58#2. Using CD-ROMComponents of CD- ROM discInstallation Guide : eDVR MD3200M Installation GuideUser’s Guide : eDVR MD3200M User’s GuideControl Center

59#3. How to recognize manufacturing dateThe manufacturing date by Webgate can be recognized by S/N(Serial Number) attached at the eachproduct.S/N : S

612. Using Control Center Lite ... 4212.1. Starting...

60#4. SpecificationGeneralCPU32bit RISC ProcessorFlash memory32MBMain memory256MBOSEmbedded LINUXVideo channel32Ch. analog video inputs via BNC connec

61Schedule recordingDaily : Day / Night / Four-segment time frameWeekly : Weekdays / Weekends, Exception daysConditions : Normal / EventText Data reco

62Storage temperature-10 ~ 55℃Operation humidity30~80%, free of condensationStorage humidity93% below, free of condensationData Backup/Expansion/CopyD

63MechanicalDimension (WⅹDⅹH)430.0 x 362.0 x 88.0 mmWeight5.5 kg (with one HDD)

PelikanCam555 West Lambert Road, Suite ABrea, CA 92821Tel : (714) 672-0333Fax : (714) [email protected] contents of th

7OVERVIEW1. What is MD3200M?The eDVR MD3200M is a 16-analog channels network digital video recorder. Video, Audio, Text andEvent-Logs are digitized an

82. Supplied accessoriesUnpack and check all the items as below;1. eDVR MD3200M (1EA) 2. AC Power Cord (1EA)3. CD (Including Software) (1EA) 4. Remote

93. Description & FunctionMD3200M front(1) Power switch(2) Function buttons(3) LED(4) USB port(5) Remote controller receiver(6) CD/DVD-RW ROM(7),(